Internal Drive Frames

Sort By:  
Dynamode SSD Mounting Kit, Frame to Fit 2.5
Dynamode SSD Mounting Kit, Frame to Fit 2.5" SSD or HDD into a 3.5" Drive Bay (SSD-FRAMESP)

Upgrade your Computer's Storage Potential.

Are you looking for the very latest 2.5" Hard Disk Drive (HDD) or Solid State Drive (SSD) upgrade for your existing, 3.5" Drive Bay Setup? 
Do you simply need a very low cost 2.5" adapter cradle for your system?
 
The SSD-RAIL is a very low cost and easy to install mounting assembly,
produced in ABS plastic to allow easy fitment of any 2.5" HDD or SSD Drive into your existing 3.5" Drive bay found on Server, Workstation and Desktop computers. The adapter cradle can also be used for other media types including 2.5" Tape Backup and media card readers also.
 
Dynamode understands that you might already have Data and Power cables for your new SATA or other interface Mass Storage Device, so we do not bundle unnecessary hardware that you will not use. Ideal for System builders and enthusiasts looking to get the most from there existing setup.
 
 
• Lightweight ABS Plastic 2.5" HDD/SSD cradle
• Ideal for 2.5" HDD or SSD fitment into 3.5" Drive Bays *
• Multi-slot design for a secure and tailored fit into any system
• Screw fixings supplied as standard
• Add enhanced Storage Potential and reduce costs
• Ideal for all systems, Desktops, Workstations and Servers
£1.91
Akasa SSD Mounting Kit, Frame to Fit 2.5
Akasa SSD Mounting Kit, Frame to Fit 2.5" SSD or HDD into a 3.5" Drive Bay (SSD-FRAMEAKASA)

SSD & HDD adapter

Mounting adapter allows a 2.5" SSD or HDD to fit into a 3.5" PC drive bay.
 
 
£3.36
Akasa Front Bay 3.5
Akasa Front Bay 3.5" Device Adapter, Frame to Fit 3.5" device/SSD/HDD into a 5.25" Bay (FRAM001-B-AKASA)
 
3.5" device/SSD/HDD adapter
 
Mounting adapter allows a 3.5" device, 3.5" HDD or 2.5" SSD/HDD to fit into a 5.25" PC drive bay
 
 
£6.49
Icy Box SSD Mounting Kit, Frame to Fit 2.5
Icy Box SSD Mounting Kit, Frame to Fit 2.5" SSD or HDD into a 3.5" Drive Bay, with Heatsink (SSD-FRAMEICYBOX)
IB-2535StS

2,5" to 3,5" HDD Converter
 
This is how a 2.5" SATA HDD or an SSD fits into a bay or an enclosure for a bigger 3.5" HDD.
As the IB-2535 is a toploader it even takes in 12,5 mm thick HDDs with three magnetic discs.
 
 
• Converts a 2.5" SATA HDD or SSD to a 3.5" SATA HDD 
• Enables the use of a high speed 2.5" SSD in a 3.5" case 
• With aluminium heat sink for the HDD cooling 
• Supports SATA 3.0 Gbit/s
£10.72
Icy Box Backplane for 4 x 2.5
Icy Box Backplane for 4 x 2.5" HDD/SSD Drives, Fits 5.25" Bay, Aluminium, Lockable (FRAM007-ICY)
IB-2240SK

Back Plane for 4x 2.5" SATA HDD
 
• For 4x 2.5" SATA HDD/SSD
• HDD Height up to 15 mm
• Robust industrial design
• Full aluminum/metal material
• Support SATA III 6 Gbit/s
• With Key Lock
 
 
For Professional Duty
2.5" HDDs are getting more and more popular as their storage capacity is growing. That's why ICY BOX offers a backplane that fits into a single 5.25" unit and is for four 2.5" SATA HDDs. It takes drives up to 15 mm high, for greatest storage capacity.
 
This IB-2240SK works reliably even with huge amounts of data being transfered making it ideal for RAID systems. While the aluminium casing helps keep the drives cool, two 40 mm fans work reliably and silently.
£65.66
Per Page      1 - 6 of 6
  • 1
Back to top