HyperX Fury Black 16GB, DDR4, 2666MHz (PC4-21330), CL16, XMP 2.0, DIMM Memory

Description

Specification

  • Series: Kingston HyperX Fury
  • DDR Type: DDR4
  • Size: 16GB
  • Speed: 2666 MHz
  • Compliance: PC4-21330
  • Pins: 288-pin
  • CAS Latency: CL16
  • Data Integrity Check: Non-ECC
  • Low Voltage: No
  • Voltage: 1.2V Typical
  • Timings: 16-18-18
  • Heatsink: Yes
  • #Hide#LED Lighting: No
  • Additional Information: See Overview
  • Package Type: Blister Pack
  • Package Weight: 0.0225 kg
  • Warranty: Lifetime
£95.84
Qty:
 
HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V.
 
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340” (34.04mm), w/o heatsink
  • Availability: In Stock
  • Model: D4-16G2666KHX16-FUBLK
  • Manufacturer: KINGSTON

Write Review

Note: Do not use HTML in the text.
Back to top