Media Converters
Description
Specification
- Type: Single-Mode Media Converter
- Enclosure Type: External
- Basic Functions: Full Duplex Flow Control (IEEE 802.3x)
Extends fiber distance up to 15km - Ports: 1 1000M SC port
1 1000M RJ45 port (Auto MDI/MDIX) - Standards and Protocols: "IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x"
- Wave Length: 1310nm
- Network Media 100BASE-FX: "UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 Ohms STP (maximum 100m)" - Network Media 1000BASE-T: "UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 Ohms STP (maximum 100m)" - Transmission Distance: 15km
- LED Indicators: "PWR, LINK, RX"
- Dimensions (WxDxH): 3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mm)
- Power Supply: External Power Adapter
- Environment (℃): Operating Temperature: 0C~40C (32F~104F)
Storage Temperature: -40C~70C (-40F~158F)
Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing - Package Type: Retail
- Package Weight: 0.4800 kg
- Warranty: Limited Lifetime
Out of Stock
£48.13
Description
Specification
- Type: Media Converter Rackmount Chassis
- Enclosure Type: Rackmount
- Basic Functions: 14 bays to house up to 14 media converters
Hot-Swappable
Power isolation for elec isolation from each bay - Ports: -
- Dimensions (WxDxH): "482 x 358 x 86 mm
Standard 19-Inch, 2U height" - Power Supply: "Input: 100-240V~50/60Hz 3.0A(Max)
Output:+9.5VDC, 9.5A(Max)
Vripple: <50mv
Noise: <100mv" - Environment (℃): Operating Temperature: 0C~40C (32F~104F)
Storage Temperature: -40C~70C (-40F~158F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity:5%~90% non-condensing - Package Type: Retail
- Package Weight: 6.7000 kg
- Warranty: Limited Lifetime
Out of Stock
£230.68
TP-LINK (MC112CS) Single-Mode SC Fiber WDM Media Converter, up to 20km, 100B-FX to 100B-TX Copper (CON-MC112CS)
10/100Mbps WDM Media Converter
MC112CS
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
- Adopts WDM technology, transmitting and receiving data on one single fiber
What This Product Does
The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK’s media converter MC111CS is just one of the examples to cooperate with MC112CS.
Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
TP-LINK (MC210CS) Single-Mode Gigabit SC+ RJ45 Fiber Media Converter, up to 15km, Wave 1310nm (CON-MC210CS)
Highlights:
• Complies with IEEE 802.3ab and IEEE 802.3z
• Provides switch configuration of Force /Auto transfer mode for FX port
• Extends fiber distance up to 15km
What This Product Does
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.
Description
Specification
- Type: Single-Mode Media Converter
- Enclosure Type: External
- Basic Functions: Full Duplex Flow Control (IEEE 802.3x)
Extends fiber distance up to 15km - Ports: 1 1000M SC port
1 1000M RJ45 port (Auto MDI/MDIX) - Standards and Protocols: "IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x"
- Wave Length: 1310nm
- Network Media 100BASE-FX: "UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 Ohms STP (maximum 100m)" - Network Media 1000BASE-T: "UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 Ohms STP (maximum 100m)" - Transmission Distance: 15km
- LED Indicators: "PWR, LINK, RX"
- Dimensions (WxDxH): 3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mm)
- Power Supply: External Power Adapter
- Environment (℃): Operating Temperature: 0C~40C (32F~104F)
Storage Temperature: -40C~70C (-40F~158F)
Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing - Package Type: Retail
- Package Weight: 0.4800 kg
- Warranty: Limited Lifetime
Out of Stock
£48.13
TP-LINK 14-Slot Media Converter Rackmount Chassis, 19" 2U, 2 x Cooling Fans, PSU (CAR-2UMCTP)
14-Slot Rackmount Chassis
TL-MC1400
- 14 bays to house up to 14 media converters
- Optional redundant power supply to ensure non-stop reliable operation
- Hot-Swappable; easy & quick replacement of converter and power supply
- Mounted two cooling fans for better ventilation
What This Product Does
The TL-MC1400 14-Slot Rack-mount Chassis is specially designed to accommodate 14 TP-LINK‘s Media Converters for central power supply, saving space and power cables. Continuous operation is of great importance to fiber communication, so the chassis is equipped with optional redundant power supply and Hot-Swapping function which allows installing/removing the converter/power supply without powering off the chassis. Moreover, to stabilize the performance and extend the lifetime, two cooling fans are installed internally. Together with MC series Gigabit / Fast Ethernet media converters, TL-MC1400 is the ideal solution for your media conversion network.
* For TP-LINK Media Converters, TL-MC1400 supports MCXXX ver:2.0 and above, not ver:1.0.”
Description
Specification
- Type: Media Converter Rackmount Chassis
- Enclosure Type: Rackmount
- Basic Functions: 14 bays to house up to 14 media converters
Hot-Swappable
Power isolation for elec isolation from each bay - Ports: -
- Dimensions (WxDxH): "482 x 358 x 86 mm
Standard 19-Inch, 2U height" - Power Supply: "Input: 100-240V~50/60Hz 3.0A(Max)
Output:+9.5VDC, 9.5A(Max)
Vripple: <50mv
Noise: <100mv" - Environment (℃): Operating Temperature: 0C~40C (32F~104F)
Storage Temperature: -40C~70C (-40F~158F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity:5%~90% non-condensing - Package Type: Retail
- Package Weight: 6.7000 kg
- Warranty: Limited Lifetime
Out of Stock
£230.68
- 1