Memory - Desktop
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: Single rank
On-Die Termination (ODT)
Unbuffered - Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 2GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: LIfetime
Description
Specification
- Series: Corsair Value Select
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Timings: 9-9-9-24
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.1000 kg
- Warranty: Lifetime
Out of Stock
£16.14
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-24000
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: OEM
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£18.93
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 4GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: Single rank
Unbuffered - Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 17-17-17
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2666 MHz
- Compliance: PC4-21300
- Pins: 288-pin
- CAS Latency: CL19
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£19.73
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0300 kg
- Warranty: Lifetime
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2133 MHz
- Compliance: PC4-17000
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Voltage: 1.2V
- Heatsink: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: Corsair Value Select
- DDR Type: DDR4
- Size: 4GB
- Speed: 2133 MHz
- Compliance: PC4-17000
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15-36
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.1000 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15
- Heatsink: Yes
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR4
- Size: 4GB
- Speed: 2666 MHz
- Compliance: PC4-21330
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15
- Heatsink: Yes
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£25.40
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL10
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Timings: 10-10-10-30
- Heatsink: Yes
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0500 kg
- Warranty: Lifetime
ADATA 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank (D3-2G1333ADATA9)
For a variety of computer configurations, the quality and capacity of RAM (Random-access memory) modules affect system stability and execution speed a great deal. ADATA Premier Series memory modules are designed specifically to boost overall computer performance and ensure the stability of your systems. In thorough conformance with industry standards, the Premier Series memory modules are stringently tested to ensure their compatibility and reliability, making them your first choice for memory upgrades in terms of quality and affordability. Choosing the Premier Series for your memory upgrade is a wise, worry-free decision that is backed by the same lifetime warranty that comes with all ADATA memory modules.
The ADATA Premier Series DDR3 1333MHz for desktops is a module composed of Double Data Rate SDRAM in the lower parasitic-loading FBGA (Fine-pitch Ball Grid Array) packaging on a 240-pin glass-epoxy printed circuit board. Running at 1.5 volts and 1333MHz of the clock, the transmission bandwidth can achieve up to 10.6 GB/s by PC3-10600 specification. The Premier Series DDR3 1333MHz modules are available in three capacities: 1GB, 2GB and 4GB, 8GB.
Conforms to Standards, Lives Up to Your Expectations
ADATA strictly adheres to quality standards, including those set by JEDEC (the Joint Electron Devices Engineering Council) and ISO9001. ADATA makes certain that the stability and performance of every memory module meets the highest quality criteria. Part of this process includes stringent testing of each memory module, requiring a 100% burn-in test score, thus ensuring compatibility and reliability with all major-brand motherboards. Choosing ADATA Premier Series products is the cost-effective solution for memory upgrade, due to the assured quality in compatibility and reliability.
What is DDR3?
The third generation of the SDRAM family, DDR3 SDRAM (Double Data Rate Three Synchronous Dynamic Random Access Memory), takes a leap further in the evolution of SDRAM technology and DRAM implementation. In comparison to its predecessor, DDR2, DDR3 SDRAM achieves a breakthrough in clock frequency, boasting increased efficiency, much higher data throughput rates, better heat dissipation, and a 30% reduction of power consumption. DDR3 SDRAM’s revolutionary technology is paving the way for the development of higher-capacity data storage capability in the near future.
Lifetime Warranty, Quality Guaranteed
In addition to our rigorous manufacturing process, ADATA ensures the quality of every memory module, and all are backed by a limited lifetime warranty.
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Kingston 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank (D3-2G1333KING9-SINGLE)
2GB 1Rx8 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM
DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height: 0.740” (18.75mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: Single rank
On-Die Termination (ODT)
Unbuffered - Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Kingston 2GB, DDR3, 1600MHz (PC3-12800), CL11, DIMM Memory, Single Rank (D3-2G1600KING11-SINGLE)
KVR16N11S6/2
2GB 1Rx16 256M x 64-Bit PC3-12800 CL11 240-Pin DIMM
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 2GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: LIfetime
Corsair Value Select 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank (D3-2G1333COR15-VS)
CORSAIR built its reputation on performance memory that shines in the most demanding computing situations: extreme gaming and high-transaction processing environments. But not all computers are put to such extreme usage. So we brought the same reliability, testing and CORSAIR quality to a line of memory designed to support standard computing situations such as popular office applications. Now it’s one of our most popular memory lines. Backed with a lifetime warranty, it is memory you can rely on.
Description
Specification
- Series: Corsair Value Select
- DDR Type: DDR3
- Size: 2GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Timings: 9-9-9-24
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.1000 kg
- Warranty: Lifetime
Out of Stock
£16.14
ADATA 4GB, DDR3, 1600MHz (PC3-12800), CL11, DIMM Memory, Single Rank, 512x8 (D3-4G1600ADATA11)
ADATA continues to lead the industry in DRAM timing and density with these 8GB Premier Series DDR3 1600 single piece memory modules. They are designed and engineered to support the ever more rigorous requirements of enthusiasts and professionals. The high 8 GB density overcomes situations where there are only a few DRAM slots on the motherboard, allowing users to maximize system potential and performance.
Meets Rigorous Standards and Specifications
The Premier Series 1600 Mbps DDR3 240-Pin (Unbuffered DIMM) are standard pin design modules operating at 1.5 volts, with transmission bandwidth up to 12.8 Gb/second (PC3 12800). The memory modules implement cutting edge technology that enables remarkable memory density on a single module. All the modules are in accordance with JEDEC (Joint Electron Device Engineering Council, JEDEC Solid State Technology Association) and RoHS design and production standards, simultaneously ensuring compatibility with all the computer systems adopting the same standard and ecologically sound product. ADATA Series memory modules come with lifetime warranty and service, providing remarkable protection.
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
ADATA Premier, 4GB, DDR4, 2400MHz (PC4-19200), CL17, DIMM Memory, 512x16, OEM (Anti Static Bag) (D4-4G2400ADATA17J-BULK)
Meets Demanding Standards for New-Generation Platforms
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Skylake platform, future proof for Kaby Lake and Cannon Lake platforms
ADATA Premier DDR4 2400 unbuffered U-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 19.2GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
Lifetime Warranty
All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-24000
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: OEM
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£18.93
Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank (D3-4G1333KING9-SINGLE)
4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM
ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 4GB
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: Single rank
Unbuffered - Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Kingston 4GB, DDR3, 1600MHz (PC3-12800), CL11, DIMM Memory, Single Rank (D3-4G1600KING11)
KVR16N11S8/4
4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 240-Pin DIMM
ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers.
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 0.740” (18.75mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Kingston 4GB, DDR4, 2400MHz (PC4-19200), CL17, DIMM, Memory, Single Rank (D4-4G2400KING17)
This document describes ValueRAM's KVR24N17S8/4 is a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V.
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 17-17-17
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
ADATA Premier, 4GB, DDR4, 2400MHz (PC4-19200), CL17, DIMM Memory, 512x16 (D4-4G2400ADATA17J)
Meets Demanding Standards for New-Generation Platforms
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Skylake platform, future proof for Kaby Lake and Cannon Lake platforms
ADATA Premier DDR4 2400 unbuffered U-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 19.2GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
Lifetime Warranty
All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
ADATA Premier, 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory (D4-4G2666ADATA19J)
ADATA Premier DDR4 2666 unbuffered-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 21.3GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
Lightning speed PCIe Gen3x4
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Skylake-X and Kaby Lake-X CPU
Lifetime Warranty
All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2666 MHz
- Compliance: PC4-21300
- Pins: 288-pin
- CAS Latency: CL19
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£19.73
ADATA Premier, 4GB, DDR4, 2400MHz (PC4-19200), CL17, DIMM Memory, 512x8 (D4-4G2400ADATA17)
Meets Demanding Standards for New-Generation Platforms
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Skylake platform, future proof for Kaby Lake and Cannon Lake platforms
ADATA Premier DDR4 2400 unbuffered U-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 19.2GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
Lifetime Warranty
All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL17
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0300 kg
- Warranty: Lifetime
ADATA Premier, DDR4, 4GB, 2133MHz (PC4-17000), CL15, DIMM Memory, 512x8 (D4-4G2133ADATA15)
Meet Rigorous Standards & New-Generation Platform
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Haswell-E platform
ADATA Premier DDR4 2133 unbuffered-DIMM memory module is the latest upgrade solution that supports Intel's Haswell-E (X99) platform for faster data transfer and enhanced power efficiency. Utilizing the 288-pin design, the operating voltage reduces from 1.5V to 1.2V, which not only helps to save power by 20%, also improves the transfer bandwidth speed up to 17GB/s for light speed performance! Every chip in ADATA memory modules meet the standards of JEDEC and RoHS, ensuring system compatibility and environmentally friendly products.
Lifetime Warranty
All ADATA memory modules are produced and tested by a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.
Description
Specification
- Series: ADATA Premier
- DDR Type: DDR4
- Size: 4GB
- Speed: 2133 MHz
- Compliance: PC4-17000
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Voltage: 1.2V
- Heatsink: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Corsair Value Select, DDR4, 4GB, 2133MHz (PC4-17000), CL15, DIMM Memory (D4-4G2133COR16-VS)
CORSAIR built its reputation on performance memory that shines in the most demanding computing situations: extreme gaming and high-transaction processing environments. But not all computers are put to such extreme usage. So we brought the same reliability, testing and CORSAIR quality to a line of memory designed to support standard computing situations such as popular office applications. Now it’s one of our most popular memory lines. Backed with a lifetime warranty, it is memory you can rely on.
Description
Specification
- Series: Corsair Value Select
- DDR Type: DDR4
- Size: 4GB
- Speed: 2133 MHz
- Compliance: PC4-17000
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15-36
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.1000 kg
- Warranty: Lifetime
ADATA Premier, DDR4, 4GB, 2133MHz (PC4-17000), CL15, DIMM Memory, 512x16 (D4-4G2133ADATA15J)
Meet Rigorous Standards & New-Generation Platform
- Complies with JEDEC standards
- RoHS compliant
- Supports Intel Haswell-E platform
ADATA Premier DDR4 2133 unbuffered-DIMM memory module is the latest upgrade solution that supports Intel's Haswell-E (X99) platform for faster data transfer and enhanced power efficiency. Utilizing the 288-pin design, the operating voltage reduces from 1.5V to 1.2V, which not only helps to save power by 20%, also improves the transfer bandwidth speed up to 17GB/s for light speed performance! Every chip in ADATA memory modules meet the standards of JEDEC and RoHS, ensuring system compatibility and environmentally friendly products.
Lifetime Warranty
All ADATA memory modules are produced and tested by a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.
Out of Stock
£25.28
HyperX Fury Black 4GB, DDR4, 2400MHz (PC4-19200), CL15, 1.2V, XMP 2.0, DIMM Memory (D4-4G2400KHX15-FU)
HyperX HX424C15FB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- Height 1.340” (34.04mm), w/heatsink
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR4
- Size: 4GB
- Speed: 2400 MHz
- Compliance: PC4-19200
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15
- Heatsink: Yes
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.0225 kg
- Warranty: Lifetime
HyperX Fury Black 4GB, DDR4, 2666MHz (PC4-21330), CL15, DIMM Memory (D4-4G2666KHX15-FU)
HyperX HX426C15FB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- Height 1.340” (34.04mm), w/heatsink
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR4
- Size: 4GB
- Speed: 2666 MHz
- Compliance: PC4-21330
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.2V
- Timings: 15-15-15
- Heatsink: Yes
- #Hide#LED Lighting: No
- Additional Information: See Overview
- Package Type: Blister Pack
- Package Weight: 0.0225 kg
- Warranty: Lifetime
Out of Stock
£25.40
HyperX Fury Black 4GB, DDR3, 1600MHz (PC3-12800), CL10, DIMM Memory (D3-4G1600KHX10-FUBLK)
HX316C10FB/4
4GB 512M x 64-Bit DDR3-1600 CL10 240-Pin DIMM
HyperX HX316C10FB/4 is a 512M x 64-bit (4GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below.
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component
Description
Specification
- Series: Kingston HyperX Fury
- DDR Type: DDR3
- Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3-12800
- Pins: 240-pin
- CAS Latency: CL10
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Timings: 10-10-10-30
- Heatsink: Yes
- #Hide#LED Lighting: No
- Package Type: Blister Pack
- Package Weight: 0.0500 kg
- Warranty: Lifetime