HyperX Fury Black 4GB, DDR4, 2666MHz (PC4-21330), CL15, DIMM Memory

Description

Specification

  • Series: Kingston HyperX Fury
  • DDR Type: DDR4
  • Size: 4GB
  • Speed: 2666 MHz
  • Compliance: PC4-21330
  • Pins: 288-pin
  • CAS Latency: CL15
  • Data Integrity Check: Non-ECC
  • Low Voltage: No
  • Voltage: 1.2V
  • Timings: 15-15-15
  • Heatsink: Yes
  • #Hide#LED Lighting: No
  • Additional Information: See Overview
  • Package Type: Blister Pack
  • Package Weight: 0.0225 kg
  • Warranty: Lifetime
£25.40
Qty:
  • Out of Stock
Print
 
HyperX HX426C15FB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.
 
 
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340” (34.04mm), w/heatsink 
  • Availability: Out of Stock
  • Model: D4-4G2666KHX15-FU

Write Review

Note: Do not use HTML in the text.
Back to top